You will have to use the refresh button to update the information for the items below.
Covid-19 precautions in place at all our Auction locations. Century follows all municipal requirements for compliance to Covid-19 regulations for each jurisdiction in which we run sales.  Safety of our customers and staff is of utmost importance to Century. 
GENERAL AUCTION INFORMATION:
This Auction is subject to “Extended/Soft” Closing Times:  Any bid arriving within the last 1 minute of the item’s closing time, extends the time that item is open by 1 minute.
Tips to Use the ClubBid System:
Using Max Bid:  Bid while you sleep!  Set a Max Bid for any item and don’t worry about monitoring the item constantly.  Your Max Bid is invisible to all other bidders and the current high bid does not rise unless another bidder triggers an increase by bidding against you.  You can increase or decrease your Max Bid at any time by simply typing a different number as your Bid.
My Favorites:  Select Star (top right corner of each item box) on any Item to save it to My Favorites. Bidding on an item also automatically saves items to My Favorites.  This allows you to focus only on the items of most interest to you.
Use “Category” Filter (upper left corner of auction listing page) to see sub-categories of items.
Use “Search” filter to find similar items from descriptions.
  
        | Lot # | 
    Photo (On) |     		Title | 
            Current Bid | 
      High Bidder | 
            Status | 
          Time Remaining | 
            
| 0634
 | 
      
     | 
  Soft Jaws For 15-18 In. Chuck, Pitch 3.00mm x 60 Degrees Serrations, Slot Width .866 In., Bolt Spacing 1.969 In., Screw Size M20 To Fit Matsumoto MMK Shank LMC **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$46.00 | 
  Darren.schan2020@gmail.com | 
 | 
closed (bidding was extended) | 
| 0635
 | 
      
     | 
  Soft Jaws For 15-18 In. Chuck, Pitch 3.00mm x 60 Degrees Serrations, Slot Width .866 In., Bolt Spacing 1.969 In., Screw Size M20 To Fit Matsumoto MMK Shank LMC **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$26.00 | 
  gfwilson308 | 
 | 
closed | 
| 0636
 | 
      
     | 
  Soft Jaws For 15-18 In. Chuck, Pitch 3.00mm x 60 Degrees Serrations, Slot Width .866 In., Bolt Spacing 1.969 In., Screw Size M20 To Fit Matsumoto MMK Shank LMC **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$10.50 | 
  Darren.schan2020@gmail.com | 
 | 
closed | 
| 0637
 | 
      
     | 
  Soft Jaws For 15-18 In. Chuck, Pitch 3.00mm x 60 Degrees Serrations, Slot Width .866 In., Bolt Spacing 1.969 In., Screw Size M20 To Fit Matsumoto MMK Shank LMC **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$34.00 | 
  gfwilson308 | 
 | 
closed (bidding was extended) | 
| 0638
 | 
      
     | 
  Soft Jaws For 15-18 In. Chuck, Pitch 3.00mm x 60 Degrees Serrations, Slot Width .866 In., Bolt Spacing 1.969 In., Screw Size M20 To Fit Matsumoto MMK Shank LMC **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$28.00 | 
  Jfksales | 
 | 
closed (bidding was extended) | 
| 0639
 | 
      
     | 
  Pie Jaws, Pitch 3.00mm x 60 Degrees Serrations, Slot Width .866 In., Bolt Spacing 1.969 In., Screw Size M20 To Fit Matsumoto MMK Shank LMC **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$41.00 | 
  machiner17 | 
 | 
closed (bidding was extended) | 
| 0639A
 | 
      
     | 
  12 In. Chuck Soft Jaws, Pitch 1.5mm x 60 Degrees, Grove .827 In., Bolt Spacing 1.181 In. **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$56.00 | 
  machiner17 | 
 | 
closed (bidding was extended) | 
| 0640
 | 
      
     | 
  Rockford 24 In. Spec Hy-Draulic Shaper c/w 440V, 3 PH, 74 In. x 18 In. 2 In. Custom Built Table, Height Adjustable, Automatic Feed Across and Up/Down, SN 77HC63 **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$3,275.00 | 
  LUKE7878 | 
 | 
closed | 
| 0641
 | 
      
     | 
  TOS Driving Head, 12 In. 3 Jaw Chuck, 7.25 In. Center Height **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$1,200.00 | 
  DMatt33 | 
 | 
closed (bidding was extended) | 
| 0643
 | 
      
     | 
  1979 Femco WRD50/1250 Radial Arm Drill c/w 220V, 3 PH, Clutch Forward and Reverse, #5 Morse Taper, Vise, 5 HP Electric Motor, 40-1920 RPM, 12 Speed, Auto Feed, SN 79-4074 **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$6,500.00 | 
  SCFC | 
 | 
closed (bidding was extended) | 
| 0645
 | 
      
     | 
  16 In. Rotary Table c/w Cross Slotted Table **Located Offsite at 9305 60 Ave, Edmonton, Viewing Monday to Friday 2PM-4PM, For More Information Contact 780-944-9144**
 | 
$420.00 | 
  george1 | 
 | 
closed | 
| 0646
 | 
      
     | 
  1989 Mazak MT-V 55A CNC Milling Machine c/w 3 Phase 480 Volt Mazatrol M-32 Control Panel, Table size 21.65 In. x 55.12 In., Axis Travel x/y/z  41.34 In./22.05 In./21.65 In., Spindle Taper CAT #50 **Located Offsite at 9215 154 Ave Grande Prairie, AB, For More Information Contact 780-944-9144. Seller Can Assist Loading, Buyer Responsible For Costs Associated* 
 | 
$1,450.00 | 
  randmsteel | 
 | 
closed | 
| 0646A
 | 
      
     | 
  Qty of Assorted Tooling Including Large Face Mill Cat 50 Holder, Renshaw MP3 Probe Cat 50, End Mill Cat 50, Kennametal Tap Holder Cat 50, Face Mill Cat 50, (4) End Mill Cat 50, 7/8 Drill Cat 50, Countersink, Cat 50 Holder, Gear Cutter Cat 50 Holder, 3/4 Drill Cat 50 to Fit Lot 646 Mazak Milling Machine **Located Offsite at 9215 154 Ave Grande Prairie, AB, For More Information Contact 780-944-9144**
 | 
$500.00 | 
  randmsteel | 
 | 
closed (bidding was extended) | 
| 0647
 | 
      
     | 
  Jarbe F3-CM Manual Milling Machine c/w Newall 3 Axis Digital Readout, Powered Overarm, LSO 50 Taper, 70 In. x 13 In. Table Vise, Wooden Platform **Located Offsite at 7409 67 St NW, Edmonton, For More Information Contact 780-944-9144** *Note: SN Not Available, Moving Available At Cost*
 | 
$14,000.00 | 
  NA | 
NA | 
closed | 
| 0650
 | 
      
     | 
  Lincoln Electric Vantage 500 Welder, Model K2325-2, Diesel, Showing 1,614.3 Hours, SN U1080908054 (Row 1)
 | 
$7,100.00 | 
  Freddie mariano | 
 | 
closed (bidding was extended) | 
| 0741
 | 
      
     | 
  Unused TMG Industrial 12 Ft. Drive Through Storage Building with Peak Ceiling, Model TMG-ST3040, 40 Ft. X 30 Ft. x 15 Ft., Door W 12 Ft. x H 11 Ft. (Row 5)
 | 
$2,925.00 | 
  projects | 
 | 
closed | 
| 0742
 | 
      
     | 
  Unused TMG Industrial Pro Series Container Shelter, Model TMG-ST3040CVF, 30 Ft. x 40 Ft. (Row 5)
 | 
$3,025.00 | 
  Craigcbw | 
 | 
closed (bidding was extended) | 
| 0743
 | 
      
     | 
  Unused TMG Industrial 2030 Peak Ceiling Storage Shelter, Model TMG-ST2030P, 30 Ft. x 20 Ft. x 12 Ft. (Row 5)
 | 
$2,200.00 | 
  KY | 
 | 
closed (bidding was extended) | 
| 0743A
 | 
      
     | 
  Unused TMG Industrial 2030 Peak Ceiling Storage Shelter, Model TMG-ST2030P, 30 Ft. x 20 Ft. x 12 Ft. (Row 5)
 | 
$2,200.00 | 
  projects | 
 | 
closed (bidding was extended) | 
| 0744
 | 
      
     | 
  Unused TMG Industrial Single Front Door Metal Garage Shed with Side Man Door, Model TMG1119, 19 Ft. x 11 Ft. x 6.5 Ft. (Row 5)
 | 
$1,775.00 | 
  KY | 
 | 
closed (bidding was extended) | 
| 0745
 | 
      
     | 
  Unused TMG Industrial Heavy Duty All-Steel Carport, 20 Ft. x 30 Ft. with 10 Ft. Enclosed Side Walls (Row 5)
 | 
$2,575.00 | 
  ford | 
 | 
closed (bidding was extended) | 
| 0746
 | 
      
     | 
  Unused TMG 10,000 Lb Two Post Floor Plate Auto Lift, 72 In. Max Lift, Model TMG-TPL45, 134 In. x 110 In. (Row 5)
 | 
$2,875.00 | 
  sandy@cobraddt.com | 
 | 
closed | 
| 0747
 | 
      
     | 
  Unused TMG Industrial HD Plate Compactor, Model TMG-PC90. 6.5 HP Loncin G200F Engine, 3400 lb. Compaction Force, 21 In. x 17 In. Plate Size (S-1-3)
 | 
$925.00 | 
  sandy@cobraddt.com | 
 | 
closed | 
| 0748
 | 
      
     | 
  Unused TMG Industrial Portable Gas Generator, Model TMG-12000GE, 12000 Starting Watts, 9000 Running Watts, 459cc OHV Engine, 120/240 VAC, Single Phase, DC Output 12 V, 8.3 A (R-1-2)
 | 
$1,010.00 | 
  Craigcbw | 
 | 
closed (bidding was extended) | 
| 0749
 | 
      
     | 
  Unused TMG Industrial Portable Gas Generator, Model TMG-12000GE, 12000 Starting Watts, 9000 Running Watts, 459 cc OHV Engine, 120/240 VAC, Single Phase, DC Output 12 V, 8.3 A (S-1-2)
 | 
$990.00 | 
  Jleblanc | 
 | 
closed (bidding was extended) | 
| 0750b
 | 
      
     | 
  Unused TMG Industrial 4 In. Semi-Trash Water Pump, Model TMG-100TWP, 7.5 HP, 223 cc, 4 Cycle, 3600 RPM OHV Motor, Max Head Lift 80 M, 352 GPM Flow, Max. Suction Head Lift 7 M (S-1-2)
 | 
$505.00 | 
  Craigcbw | 
 | 
closed (bidding was extended) | 
| 0751
 | 
      
     | 
  Unused TMG Industrial 3 in. Semi-Trash Water Pump, Model TMG-80TWP, 7.0 HP, 208 cc, 4 Cycle, 3600 RPM OHV Motor, Max Head Lift 30 M, 242 GPM Flow, Max Suction Head Lift 7 M (S-1-2)
 | 
$400.00 | 
  Craigcbw | 
 | 
closed (bidding was extended) | 
| 0752
 | 
      
     | 
  Unused TMG Industrial 24 In. Semi Automatic Tire Changer, Model TMG-TC24, 2 HP. 12.5 A, 120 V, Internal Rim Clamping Cap 12 In.- 24 In., 115-145 PSI Operating Pressure, External Rim Clamping Cap 10 In. - 22 In., Max Tire Diameter 41 In., Wheel Width 3 In. - 22 In. (S-1-3)
 | 
$1,950.00 | 
  Redeemed | 
 | 
closed (bidding was extended) | 
| 0753
 | 
      
     | 
  Unused TMG Industrial HD Wheel Balancer, Model TMG-WB24, 115 V, 8 A, 220 RPM, Accuracy - IG Rim Diameter 10 In. - 24 In., Rim 1.5 In. - 16 In., Max Wheel Weight 154 lbs., Max Tire Diameter 39 3/8 In. (B1 Front)
 | 
$790.00 | 
  Woody88 | 
 | 
closed (bidding was extended) | 
| 0771
 | 
      
     | 
  (3) Prime Well PW620 Tires, Size 285/75R24.5 (Row 1)
 | 
$111.00 | 
  pitboss | 
 | 
closed | 
| 0772
 | 
      
     | 
  (7) Bridgestone R196 Tires on 10 Bolt Rims, Size 11R22.5 (Row 1)
 | 
$770.00 | 
  JAD | 
 | 
closed (bidding was extended) | 
| 0773
 | 
      
     | 
  (2) Michelin XZE2 Tires on 10 Bolt Rims, Size 11R24.5 (Row 1)
 | 
$420.00 | 
  Hardev Sandhu | 
 | 
closed | 
| 0774
 | 
      
     | 
  (2) Triangle TR686 Tires, Size 11R24.5
 | 
$245.00 | 
  Hardev Sandhu | 
 | 
closed | 
| 0775
 | 
      
     | 
  (1) Michelin X-Line Tire on 10 Bolt Rim, Size 11R24.5 (Row 1)
 | 
$205.00 | 
  Pete379 | 
 | 
closed | 
| 0776
 | 
      
     | 
  (2) Michelin Tires, 11R24.5, (1) Firestone Tire 11R24.5 (Row 1)
 | 
$42.00 | 
  Jan63 | 
 | 
closed | 
| 0777
 | 
      
     | 
  (4) Bridgestone V-Steel 11R24.5 Tires (Row 1)
 | 
$152.00 | 
  BK Pipe | 
 | 
closed (bidding was extended) | 
| 0778
 | 
      
     | 
  (4) Bridgestone V-Steel 11R24.5 Tires (Row 1)
 | 
$237.00 | 
  HYDRO | 
 | 
closed | 
| 0779
 | 
      
     | 
  (4) Bridgestone V-Steel 11R24.5 Tires (Row 1)
 | 
$175.00 | 
  Gusshultz | 
 | 
closed (bidding was extended) | 
| 0780
 | 
      
     | 
  (4) Bridgestone V-Steel 11R24.5 Tires (Row 1)
 | 
$160.00 | 
  sharptail | 
 | 
closed | 
| 0781
 | 
      
     | 
  (4) Bridgestone V-Steel 11R24.5 Tires (Row 1)
 | 
$170.00 | 
  sharptail | 
 | 
closed (bidding was extended) | 
| 0782
 | 
      
     | 
  (3) Tractor Tires, Size 7.50-16LT, (2) Tractor Tires on Rims, (1) Tractor Tire with No Rim (Row 2)
 | 
$5.00 | 
  sharptail | 
 | 
closed (bidding was extended) | 
| 0800
 | 
      
     | 
  VacMasters Tank, Approx. 4 Ft. Wide x 6 Ft. Long (Row 2)
 | 
$2,950.00 | 
  freddy boy 101 | 
 | 
closed | 
| 0800A
 | 
      
     | 
  Kaltenbach HB500NC Metal Band Saw c/w 3 Phase Motor, Blade *Note: Working Condition Unknown* (Row 5)
 | 
$305.00 | 
  LRP | 
 | 
closed | 
| 0802
 | 
      
     | 
  Mud Tank, 84 In. x 66 In. x 2 Ft. 6 In. w/ Storage Box, 6 Ft. 6 In. x 2 Ft. 4 In. x 2 In. (North Fence)
 | 
$105.75 | 
  1934hudson | 
 | 
closed | 
| 0803
 | 
      
     | 
  Skid Mounted Tank, Model TF1000, 76 In. x 3 Ft. 6 In. x 4 Ft.  (North Fence)
 | 
$126.00 | 
  TOTAA | 
 | 
closed | 
| 0811
 | 
      
     | 
  Westinghouse 75 HP Electric Motor (Row 2)
 | 
$155.00 | 
  JUNKnDiSoRdErLy | 
 | 
closed | 
| 0812
 | 
      
     | 
  Eurodrive Gear Motor, 20 HP, Ratio 40/1, S/N R133DT160L4TF (Z5)
 | 
$470.00 | 
  #2 | 
 | 
closed | 
| 0812A
 | 
      
     | 
  Link-Belt 1948S119-Y In-Line Helical Gear Speed Reducer, SN D850550 (Row 5)
 | 
$255.00 | 
  #2 | 
 | 
closed | 
| 0813
 | 
      
     | 
  16 In. Dezurik Hydraulic Knife Gate Valve, Part 9620770R001 (Row 2)
 | 
$99.00 | 
  PacWest32 | 
 | 
closed | 
| 0814
 | 
      
     | 
  10 In. Dezurik Hydraulic Knife Gate Valve, Part 9620770R001 (Row 3)
 | 
$100.00 | 
  PacWest32 | 
 | 
closed | 
| 0815
 | 
      
     | 
  Tarby Progressing Cavity Pump, Model 205T012CD0 w/ Toshiba Induction Motor, 3 Phase, Model BY756FLF20M (Row 2)
 | 
$101.00 | 
  alta109K | 
 | 
closed | 
| 0816
 | 
      
     | 
  Eagle Manufacture Pump w/ WEG 3 Phase Induction Motor, Model 256T0292 (Row 3)
 | 
$100.00 | 
  Kaldox | 
 | 
closed | 
| 0817
 | 
      
     | 
  Flowserve Pump w/ Baldor 3 Phase Industrial Motor, Model M2334T, SN 1132201CHP0013 (Row 3)
 | 
$200.00 | 
  calgaryscrewpiles | 
 | 
closed | 
| 0818
 | 
      
     | 
  Viking K4125 Pump w/ Superline 3 Phase Induction Motor (Row 5)
 | 
$375.00 | 
  SC1504 | 
 | 
closed | 
| 0819
 | 
      
     | 
  Flowserve Slurry Pump Casing, 45 In. x 45 In. x 25 In. (Row 5)
 | 
$51.00 | 
  Indermann23 | 
 | 
closed | 
| 0819A
 | 
      
     | 
  Flowserve Slurry Pump Casing, 45 In. x 45 In. x 20 In. (Row 5)
 | 
$51.00 | 
  Indermann23 | 
 | 
closed | 
| 0821
 | 
      
     | 
  Unused 96 In. Stainless 24 Drawer Tool Chest With Work Station, Wood Top, Anti Fingerprint, Model HTC9624W (Z1)
 | 
$1,130.00 | 
  krischar | 
 | 
closed (bidding was extended) | 
| 0822
 | 
      
     | 
  Unused 96 In. Stainless 24 Drawer Tool Chest With Work Station, Wood Top, Anti Fingerprint, Model HTC9624W (Z1)
 | 
$1,085.00 | 
  DMatt33 | 
 | 
closed (bidding was extended) | 
| 0823
 | 
      
     | 
  Unused 72 In. Red Powder Coated Tool Chest with 15 Drawers, 3 Cabinets and Pegboard, 72 In. W x 18 In. D x 73.6 In. H, 6 In.  Casters, Model HTC7218RC-R (Z1)
 | 
$1,210.00 | 
  Craigcbw | 
 | 
closed | 
| 0824
 | 
      
     | 
  Unused 72 In. Black/Stainless Tool Chest with 15 Drawers, 3 Cabinets and Pegboard, 72 In. W x 18 In. D x 73.6 In. H, 6 In. Casters, Model HTC7218B-G (Z3)
 | 
$1,095.00 | 
  Craigcbw | 
 | 
closed | 
| 0825
 | 
      
     | 
  Unused 72 In. Stainless Tool Chest with 15 Drawers, 3 Cabinets and Pegboard, 72 In. W x 18 In. D x 73.6 In. H, 6 In. Casters, Model HTC7218W (Z1)
 | 
$1,125.00 | 
  s_havinga | 
 | 
closed | 
| 0826
 | 
      
     | 
  Unused 72 In. Stainless Steel 15 Drawer Tool Chest With Wood Top with Key, 72 In. W x 18 In. D x 37.4 In. H, Model HTC7215W (Y-1-2)
 | 
$850.00 | 
  Blades60 | 
 | 
closed (bidding was extended) | 
| 0827
 | 
      
     | 
  Unused 72 In. Stainless Steel 15 Drawer Tool Chest with Wood Top with Key, 72 In. W x 18 In. D x 37.4 In. H, Model HTC7215W
 | 
$880.00 | 
  KevRon | 
 | 
closed (bidding was extended) | 
| 0828
 | 
      
     | 
  Unused TMG Industrial 10 Ft Work Bench Cabinet, Model 10WB, Bamboo Tabletop, 14 Drawers, 112 In. x 26 In. x 35 In. (Z6)
 | 
$1,100.00 | 
  Jodd 2015 | 
 | 
closed | 
| 0829
 | 
      
     | 
  Unused TMG Industrial 10 Ft. Work Bench Cabinet, Bamboo Tabletop, 14 Drawers, 112 In. x 26 In. x 35 In. (Z6)
 | 
$1,325.00 | 
  Frieser | 
 | 
closed | 
| 0830
 | 
      
     | 
  TMG Industrial 20 Drawer Storage Chest, Model TMG-SC88, 88 1/2 In. x 24 In. x 87 In. (Y-1-2)
 | 
$1,525.00 | 
  Frieser | 
 | 
closed | 
| 0831
 | 
      
     | 
  Unused TMG Industrial 10 Ft. Work Bench Cabinet Combo, 30 Drawers, 112 3/8 In. x 27 1/2 In. x 37 3/8 In. (Z6)
 | 
$2,625.00 | 
  DanMan202 | 
 | 
closed (bidding was extended) | 
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.
You can enter the minimum bid of %s or a greater amount.
If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter.  So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.