Classified Listing: ClubBid Buy-Now Items

Page 1 of 2    
Previous Page|Next Page
Grid with images
Page 1 of 2    
Previous Page|Next Page
Grid with images
You can enter a new max bid at any time by entering a bid greater than your current high bid.
A max bid would make it more difficult for others to outbid you.

A max bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your max bid amount) in order to maintain your lead position.

To get a max bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a max bid unless another bidder has a max bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your max bid amount.

Your max bid amount is kept confidential from other bidders.

You can lower or delete a max bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using max bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a max bid.

You can raise or lower your max bid at any time by entering a new amount.

If you wish to remove your max bid you can do so by entering an amount equal to the current bid into the bid form.

You have a max bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this max bid by using the form above.

If you want to remove your max bid click here.
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
Click to view Item Photo Gallery

Item Description:

Lil Orbits SS2400 GII Gas Fired Mini Donut Vendor Cart Package

Unused, however missing some peices.  Missing items listed below.

  • For high-attendance outdoor-only functions, the donut machine in this package lets you operate free of electrical hookups and generators.
  • Featuring the SS2400-GII, our high-production version of the propane-fired machine.
  • SS2400-GII Gas-Fired machine has been redesigned to meet the latest Canadian gas standards as well as the current ETL and NSF standards.
  • The Lil’ Orbits Model SS2400-GII gas fired donut machine produces large volumes of donuts in nearly any location.  
     
    Profitable selling opportunities can occur almost anywhere. But, lack of an adequate source of electricity can limit those opportunities. County fairs, game fairs, flea markets, parking lots, etc. may be a long distance from the nearest AC outlet. The SS2400-GII solves that problem.
  • Requires, One 20 lb. propane tank (not included) & a 12 Volt deep-cycle marine battery (not included) will power the machine motors for up to 9 hours per charge.

Features

  • Safety-Proven Design...operates with a standard propane tank. Includes many fail-safe devices to prevent misuse. All gas components A.G.A listed. All electrical enclosures ETL listed. Tested to meet CSA/TSSA and NSF standards.
  • Quick Hookup...simply fill machine with shortening, attach gas line to propane tank, plug in power cord to specially-designed inverter which is powered by a 12V battery, and you're in business.
  • Completely Automated...cooks both sides, then automatically flips out the cooked product into the receiving tray.
  • Easy to Operate...a new operator can become skilled in minutes! Training video included with machine.
  • Variable Speed...solid state speed control varies from a tantalizing 1 donut per minute up to 2400 donuts per hour. You can pace output to demand and always get action attraction.
  • Easy To Clean...only 7 basic components. Chains, sprockets and conveyor flights have been eliminated. A breeze to clean!
  • Cash Control...tamper-proof digital counter keeps track of every donut made.
  • Quality Control...solid state timing features control cooking time, so every donut comes out perfectly cooked for exact quality control.
  • Food grade stainless steel and aluminum construction.
  • Sets Up In Minutes...no tools required.
  • Modern Flotation System
  • Minimum Maintenance

Equipment missing is as follows:

  • Cash Register (Any cash register will work in its place)
  • Mix Scale
  • On/Off Fire Control Switch
  • Keys for Deep fryer unit
  • Display warmer double heat lamps (any double light system will work)
  • Nitro Cooker is presumed missing

Expired Product

  • Liquid Shortening
  • Mix Bags

Note: Johnson Controls Calgary must change and inspect the downdraft unit before operating

Original Package Included (to be confirmed)

Click to view Item Photo Gallery

Item Description:

Link-Belt RT Crane

RTC-8065

Vin#: D719-2157

Cummins 8.3L, 215Hp, Microguard 434 System, 4-Section Boom, J16, 2 Winches, 29.5-25 Tires

Unable to Confirm S/N and year

Click to view Item Photo Gallery

Item Description:

1981 Grove RT Crane

RT980

Vin#: 48763

Cat 6 Cylinder, Loadwise 610 plus Cranesmart System.  4-Sec Boom, J16, 2-Winches, 33.25 - 35 Tires

3487 Hours Showing

Engine Hours 4138

Click to view Item Photo Gallery

Item Description:

Terex RT Crane

RT160

Vin#: 460192

4-Section Boom, J16, 2-Winches, 29.5-25 Tires

Open Engine Load!

20441 Hours Showing

005295 Miles

Unable to Confirm Year

Click to view Item Videos Click to view Item Photo Gallery

Item Description:

2015 John Deere 872GP AWD Grader  

Ser.# - 1DW872GPTED666275   

Comes with 16’ moldboard, Rear ripper, 17.5R25 Michelin Snow plus tires and Blade lift accumulators. Snow Wing and push blade not included

Current hours – 6550        Estimated hours as of February 10th, 2019 – 7100

Click to view Item Videos Click to view Item Photo Gallery

Item Description:

2015 Caterpillar 160M2 AWD Grader    

Ser.# - CAT0160MCR9T00345    

Comes with 16’ moldboard, Rear ripper, 17.5R25 tires, Snow wing,  and Blade lift Accumulators.          

Push block not included.

Current hours -  - 3900             

Estimated hours as of February 10th, 2019 – 4500

Click to view Item Videos Click to view Item Photo Gallery

Item Description:

2015 John Deere 872GP AWD Grader   

Ser.# - 1DW872GPHFD666547    

Comes with 16’ moldboard, Rear ripper, 17.5R25 Michelin Snow plus tires and Blade lift Accumulators. Snow wing and front blade not included

Current hours – 5640           

Estimated hours as of February 10th, 2019 – 6100

 

Click to view Item Photo Gallery

Item Description:

Self-dumping hoppers are a simple way to collect and transfer material within a job site. Whether it’s a manufacturing plant, warehouse, machine shop or a construction site the self-tipping design makes them safe and easy to operate.

  • Made for really tough jobs. Safely transport and dump heavy loads.
  • All-welded steel construction.
  • Simply pull the cable from the seat of your forklift to release hopper.
  • Safety chain secures hopper to the forklift.
  • Made with Q235 Steel
  • Tipping Bin is 3mm thick steel (8 gauge)
  • Top Rail Lip 50x30x3mm steel
  • Payload Capacity: 1000 KG or 2200lbs
  • Colour: Blue
  • Available in 3/4 – 2 cubic yard sizes
  • Designed to be moved by forklift
  • Easy operation
  • Single lever design
  • Triggered from the ground or elevated from a chain
  • Safety latch feature prevents unexpected tipping
  • 8 GA hot rolled sheet overall construction with Heavy-duty PFC 80x43mm plate base, 5mm thick steel (4 gauge)
  • Welding – All inner seams are continuous welds
  • Two coats of anticorrosive primer on all exterior surfaces
  • Two coats of industrial enamel paint in any single colour

0.5 CBM Capacity, (17.5 Cubic Feet, 0.65 Yards) 

  • Overall Dimensions
    • 1275mm Length (50 in)
    • 1030mm Height (40 in)
    • 865cm Width (34 in)

160x80 Fork Pockets (6.5”x 3”), 385ID-705OD (15-28”) between pockets. RHS 160x80x5mm Steel (4 gauge)

Sizes also Available:

  • 1 CBM Capacity (35 Cubic Feet, 1 Yard)
  • 1.5 CBM Capacity (52.5 Cubic Feet, 2 Yards)
Click to view Item Photo Gallery

Item Description:

Self-dumping hoppers are a simple way to collect and transfer material within a job site. Whether it’s a manufacturing plant, warehouse, machine shop or a construction site the self-tipping design makes them safe and easy to operate.

  • Made for really tough jobs. Safely transport and dump heavy loads.
  • All-welded steel construction.
  • Simply pull the cable from the seat of your forklift to release hopper.
  • Safety chain secures hopper to the forklift.
  • Made with Q235 Steel
  • Tipping Bin is 3mm thick steel (8 gauge)
  • Top Rail Lip 50x30x3mm steel
  • Payload Capacity: 1000 KG or 2200lbs
  • Colour: Blue
  • Available in 3/4 – 2 cubic yard sizes
  • Designed to be moved by forklift
  • Easy operation
  • Single lever design
  • Triggered from the ground or elevated from a chain
  • Safety latch feature prevents unexpected tipping
  • 8 GA hot rolled sheet overall construction with Heavy-duty PFC 80x43mm plate base, 5mm thick steel (4 gauge)
  • Welding – All inner seams are continuous welds
  • Two coats of anticorrosive primer on all exterior surfaces
  • Two coats of industrial enamel paint in any single colour

1 CBM Capacity (35 Cubic Feet, 1.3 Yards actual) 

  • Overall Dimensions
    • 1935cm Length (76in)
    • 1255cm Height (49 in)
    • 1035cm Width (41 in)
    • 160x80 Fork Pockets (6.5”x 3”), 402ID-722OD (16-29”) between pockets. RHS 160x80x5mm Steel (4 gauge)

Sizes Also Available:

  • 5 CBM Capacity, (17.5 Cubic Feet, 0.5 Yard)
  • 1.5 CBM Capacity (52.5 Cubic Feet, 2 Yards)
Click to view Item Photo Gallery

Item Description:

Self-dumping hoppers are a simple way to collect and transfer material within a job site. Whether it’s a manufacturing plant, warehouse, machine shop or a construction site the self-tipping design makes them safe and easy to operate.

  • Made for really tough jobs. Safely transport and dump heavy loads.
  • All-welded steel construction.
  • Simply pull the cable from the seat of your forklift to release hopper.
  • Safety chain secures hopper to the forklift.
  • Made with Q235 Steel
  • Tipping Bin is 3mm thick steel (8 gauge)
  • Top Rail Lip 50x30x3mm steel
  • Payload Capacity: 1000 KG or 2200lbs
  • Colour: Blue
  • Available in 3/4 – 2 cubic yard sizes
  • Designed to be moved by forklift
  • Easy operation
  • Single lever design
  • Triggered from the ground or elevated from a chain
  • Safety latch feature prevents unexpected tipping
  • 8 GA hot rolled sheet overall construction with Heavy-duty PFC 80x43mm plate base, 5mm thick steel (4 gauge)
  • Welding – All inner seams are continuous welds
  • Two coats of anticorrosive primer on all exterior surfaces
  • Two coats of industrial enamel paint in any single colour

0.5 CBM Capacity, (17.5 Cubic Feet, 0.65 Yards) 

  • Overall Dimensions
    • 1275mm Length (50 in)
    • 1030mm Height (40 in)
    • 865cm Width (34 in)
    • 160x80 Fork Pockets (6.5”x 3”), 385ID-705OD (15-28”) between pockets. RHS 160x80x5mm Steel (4 gauge)

1 CBM Capacity (35 Cubic Feet, 1.3 Yards) 

  • Overall Dimensions
    • 1935cm Length (76in)
    • 1255cm Height (49 in)
    • 1035cm Width (41 in)
    • 160x80 Fork Pockets (6.5”x 3”), 402ID-722OD (16-29”) between pockets. RHS 160x80x5mm Steel (4 gauge)

1.5 CBM Capacity (52.5 Cubic Feet, 2 Yards)

  • Overall Dimensions
    • 2100cm Length (83 in)
    • 1345cm Width (53 in)
    • 1255cm Height (50 in)
    • 160x80 Fork Pockets, 725ID-1085OD (29-43”) between pockets. RHS 160x80x5mm Steel (4 gauge)

Sizes Also Available:

  • 5 CBM Capacity, (17.5 Cubic Feet, 0.5 Yard)
  • 1 CBM Capacity (35 Cubic Feet, 1 Yard)
Click to view Item Photo Gallery

Item Description:

1990 Chevy 1500 Shortbox 454SS

130K Km

Vin#:IGCDC14NILZ232773

Fully Loaded

Bucket Console

400 HP 396

Click to view Item Photo Gallery

Item Description:

1990 Chevy 1500 Shortbox 454SS

Vin#:IGCDC14NXLZ190863

Fully Loaded

Bucket Console

400 HP 396

Click to view Item Photo Gallery

Item Description:

New XCMG FL2ST Forklifts - 3 Available

Triple Stage Masts 165"

LPG

Nissan K25 Engine

Pneumatic Tires

Backup Alarm

Beacon

Hydrostatic Transmission

Side Shift

42" Forks

Click to view Item Photo Gallery

Item Description:

2006  Western Star T/A Data Van Body 4900 SA

VIN: 5KKHALDLX6PV96559

C/W C11 Cat Engine 370 HP Diesel, 13 Speed Fuller Transmission 

Showing 320,000 KMS, 20049 HRS, GVWR 22,600 KG, 11R 24.5 Tire Size

24'9" Frame, 32" Sleeper  

24' Intercontinental truck body, set up as office and test lab.  

With Reese hitch, electric brake controller, hydraulic driven generator & posi air shutoff

Click to view Item Photo Gallery

Item Description:

2007 Sterling L900 Tandem Axle Flatdeck Picker Truck

 

C/W DGL Frame, 20K Front, 40K Rears

269in WB, C7 300hp, 8 Speed Transmission

2005 Hiat 200C w/Remote

Click to view Item Photo Gallery

Item Description:

Vin# T0329DK179475

4575 hours showing

 

Click to view Item Photo Gallery

Item Description:

New XCMG FL2ST Forklifts - 3 Available

Triple Stage Masts 165"

LPG

Nissan K25 Engine

Pneumatic Tires

Backup Alarm

Beacon

Hydrostatic Transmission

Side Shift

42" Forks

Click to view Item Photo Gallery

Item Description:

Bucket mixer                                                     1

The highest quality heavy duty skid steer pallet fork designed capable to mix and pour massive amounts of cement quickly, efficiently and accurately.  Ideal for not only commercial applications but residential and farm use as well, and quickly mounts to your skid steer or tractor loader.

Key Specifications

  • Length: 1590mm, 63”
  • Width: 1090mm, 43”
  • Height: 800mm, 32”
  • Capacity: 400L
  • Solenoid valve: 12V
  • Working pressure: 160 - 210bar
  • Hydraulic flow: 55-90 LPM
Click to view Item Photo Gallery

Item Description:

Wood Chipper                                                  

The highest quality heavy duty skid steer pallet fork designed to remove trees and branches and leave behind useful, uniform wood chips that can be used in a variety of landscape projects.  Ideal for not only commercial applications but residential and farm use as well, and quickly mounts to your skid steer or tractor loader.

Key Specifications

  • Working flow 50-90 LPM
  • Hooper 475*345mm (19in x 14in)
  • Operation height 900mm, 36”
  • Chip capacity 100mm for fresh wood, 4”
  • Conveyor 90 degree deflected
  • Transmission Belt driven
  • Blade A-series

BuyNow Price: $2999.99

Click to view Item Photo Gallery

Item Description:

Pallet fork, 48in                                                3

The highest quality heavy duty skid steer pallet fork designed for all of your pallet moving needs. It quickly mounts to your skid steer or tractor loader.

Key Specifications

  • Fork length: 48in
  • Loading capacity: 1500kg, 3300lb
  • Width: 1240mm, 49”
  • Height: 980mm, 39”
  • Weight: 175kg, 385lb

BuyNow Price: $899.99

 

Click to view Item Photo Gallery

Item Description:

Rock bucket with Grapple, 72in  

The highest quality heavy duty skid steer skeleton rock bucket built for back dragging, raking, wedging small trees and land leveling. These grapples feature removable bolt-on side plates which make them highly usable with a variety of applications from scrap metal, firewood, logs, brush piling, and rocks.  Ideal for not only commercial applications but residential and farm use as well, the bucket is easy to attach and simple to operate.

Key Specifications

  • Working width: 72in/1830mm
  • Working range: 300-500mm (12” – 20”)
  • Working pressure: 160-210 bar
  • Working flow: 50-90 LPM
  • Weight: 400kg
  • Length x Width x Height: 1870x1100x790mm (74” x 43” x 31”)

BuyNow Price: $1799.99

Click to view Item Photo Gallery

Item Description:

New Skeleton Rock bucket, 72" Wide

The highest quality heavy duty skid steer skeleton rock bucket built for back dragging, raking, wedging small trees and land leveling. Ideal for not only commercial applications but residential and farm use as well, the bucket is easy to attach and simple to operate.

Key Specifications

  • Size: 72in, 1829mm
  • Spacing: 76mm, 3” Rib Spacing
  • Length: 1350mm, 53”
  • Width: 1830mm, 72”
  • Height: 620, 24.5”
  • Weight: 190kg, 420lb

BuyNow Price: $899.99

Click to view Item Photo Gallery

Item Description:

Skeleton Rock bucket, 84in Wide

The highest quality heavy duty skid steer skeleton rock bucket built for back dragging, raking, wedging small trees and land leveling. Ideal for not only commercial applications but residential and farm use as well, the bucket is easy to attach and simple to operate.

Key Specifications

  • Size: 84in, 2134mm
  • Spacing: 76mm, 3” Rib Spacing
  • Length: 1350mm, 53”
  • Width: 3130mm, 123”
  • Height: 620, 24.5”
  • Weight: 210kg, 462lbs

 

Click to view Item Photo Gallery

Item Description:

Closed Sweeper, 72in

The highest quality heavy duty skid steer sweepers that sweep dirt and debris or scrape mud going forward or in reverse. Ideal for construction, industrial or municipal jobs, the S72 Sweeper is easy to attach and simple to operate.

Key Specifications

  • Width: 72"
  • Weight: 970 lb
  • Bucket Capacity: 0.52 cubic yard
  • Brush Diameter: 22"
  • Hitch Type: Skid Steer Quick Attach
  • Power Requirement: 45-75 HP
  • Dimensions: 86" x 53" x 31.5" (L x W x H)
  • Working width: 1830mm, 72”
  • Bristle diameter: 560mm, 22”
  • Bucket capacity: 0.4 cbm
  • Working pressure: 160-210 bar
  • Working flow: 50-90 LPM
  • Weight: 440kg
  • Packing dimension: 2200*1350*800mm

Box Dimensions

80" x 55" x 30" (L x W x H)

BuyNow Price: $2999.99

Click to view Item Photo Gallery

Item Description:

Rotary Tiller, Direct Drive, 72in             

The highest quality heavy duty skid steer rotary tiller designed for gardens, food plots, landscaping and any other application that requires tillage. It quickly mounts to your skid steer or tractor loader.

Key Specifications

  • Working width: 72in
  • Working pressure: 160-210 bar
  • Working flow flux: 55-90 LPM
  • Dimension: 2177x850x650mm (86”x 34”x26”)
  • Other data please refer to the drawing.

BuyNow Price: $2699.99

Click to view Item Photo Gallery

Item Description:

Industrial Grapple Bucket, 72in                 4

The highest quality heavy duty skid steer grapple that allows you to grab and pick up everything from logs and rocks to construction materials.

Key Specifications

  • Width: 72"
  • Weight: 880 lb
  • Bucket Capacity: 0.6 cubic yard
  • Grapple Diameter: 17" to 35"
  • Grabbing Capacity: 2200 lbs
  • Hitch Type: Skid Steer Quick Attach
  • Power Requirement: 45-75 HP
  • Dimensions: 72" x 43" x 31" (L x W x H)
  • Working width: 72in/1830mm
  • Working range: 300-500mm (12” – 20”)
  • Working pressure: 160-210 bar
  • Working flow: 50-90 LPM
  • Weight: 400kg

Box Dimensions

80" x 50" x 40" (L x W x H)

BuyNow Price: $1799.99

Click to view Item Photo Gallery

Item Description:

Dozer blade, 72in      

High quality heavy duty skid steer attachments to fit most skid loaders in the market.

Key Specifications

  • Width: 72"
  • Height: 32"
  • Weight: 726 lb
  • Blade Angle: left and right +/- 22°
  • Blade Thickness: 3/16"
  • Cutting Edge Thickness: 7/16"
  • Cutting Edge Material: Steel
  • Hydraulic QD: Flush Face push-to-connect couplings
  • Power Requirement: 45-75 HP
  • Working width: 1830mm/72in
  • Working height: 720mm/28.5”
  • Working length: 970mm/38”
  • Weight: 330kg
  • Working pressure: 160-210 bar
  • Hydraulic flow: 40-90 LPM
Click to view Item Photo Gallery

Item Description:

Dozer blade, 84in                                             3

High quality heavy duty skid steer attachments to fit most skid loaders in the market.

Key Specifications

  • Width: 84"
  • Height: 32"
  • Weight: 880 lb
  • Blade Angle: left and right +/- 22°
  • Blade Thickness: 3/16"
  • Cutting Edge Thickness: 7/16"
  • Cutting Edge Material: Steel
  • Hydraulic QD: Flush Face push-to-connect couplings
  • Power Requirement: 45-75 HP
  • Working width: 2130mm/84in
  • Working height: 720mm/28.5in
  • Working length: 970mm/38”
  • Weight: 400kg
  • Working pressure: 160-210 bar
  • Hydraulic flow: 40-90 LPM

Box Dimensions

86" x 44" x 34" (L x W x H)

Click to view Item Photo Gallery

Item Description:

4 in 1 bucket, 84in width                                

The highest quality heavy duty skid steer 4-in-1 Bucket that meets all of your needs in four different applications: scooping, leveling, grading and grabbing.

Key Specifications

  • Width: 84"
  • Weight: 1052 lb
  • Bucket Capacity: 0.7 cubic yard
  • Load Capacity: 2200 lbs
  • Hitch Type: Skid Steer Quick Attach
  • Power Requirement: 45-75 HP
  • Dimensions: 84" x 36" x 26" (L x W x H)
  • Bucket size: 0.6 CBM
  • Length: 2130mm/84in
  • Width: 920mm
  • Height: 660mm
  • Weight: 478kg
  • Working pressure: 160-210 bar
  • Hydraulic flow: 40-90 LPM

Box Dimensions

90" x 40" x 30" (L x W x H)

Click to view Item Photo Gallery

Item Description:

4 in 1 bucket, 72in                                     

The highest quality heavy duty skid steer 4-in-1 Bucket that meets all of your needs in four different applications: scooping, leveling, grading and grabbing.

Key Specifications

  • Width: 72"
  • Weight: 880 lb
  • Bucket Capacity: 0.65 cubic yard
  • Load Capacity: 2000 lbs
  • Hitch Type: Skid Steer Quick Attach
  • Power Requirement: 45-75 HP
  • Dimensions: 72" x 36" x 26" (L x W x H)
  • Bucket size: 0.5 CBM
  • Length: 1830mm/72in
  • Width: 920mm
  • Height: 660mm
  • Weight: 438kg
  • Working pressure: 160-210 bar
  • Hydraulic flow: 40-90 LPM

Box Dimensions

78" x 40" x 30" (L x W x H)

Click to view Item Photo Gallery

Item Description:

Bale Spear 48” Tine                                        

The highest quality heavy duty skid steer pallet fork designed for all of your bale moving needs. It quickly mounts to your skid steer or tractor loader.

Key Specifications

  • Specs with 48in fork tine:
  • Weight: 150kg, 330lbs
  • Length: 1250mm, 49”
  • Width: 1150mm, 45”
  • Height: 557mm, 22”
  • Quantity of tine sleeve: 4
    • 2x 32in bottom tine,
    • 1x 48in top tine

BuyNow Price: $699.99

Click to view Item Photo Gallery

Item Description:

c/w ROPS, Cab, A/C, Heat, SU Blade, Single Tilt, 4 BBL Multi Shank Ripper. Note:  Work Orders Available.

Click to view Item Photo Gallery

Item Description:

c/w EROPS, Heat, A/C, 6 Way Blade, Ripper.

Click to view Item Photo Gallery

Item Description:

1990 CAT D4C LGP Pipelayer

c/w Mid Western Hydraulics, Folding Boom

Click to view Item Photo Gallery

Item Description:

2014 CAT CP44 Vibratory Pad Foot Compactor c/w A/C Cab, Showing 1,279 HRS

Click to view Item Photo Gallery

Item Description:

2014 CAT CP44 Padfoot S/D Compactor

c/w CAT C4.4, 66" Drum, A/C Cab, 14.9-24 Tires, Showing 2,269 HRS.

Click to view Item Photo Gallery

Item Description:

2012 Kobelco SK295. 

7500hrs

Thumb Hydraulic Coupler

2 buckets

$109,900  CDN

Click to view Item Photo Gallery

Item Description:

Package Includes:

2004 4300 Linkbelt Excavator 

10,000 Hours

Aux plumping 

NYE 48” bucket 

Good shape All Around. 

Serial number # LE2J04398

 

1989 Ford L8000 Tandem dump truck

108,900 Kms

Vin#7FD2W8A8KVA54867 Certified in 2015

 

1989 544C John Deere LOADER 

9756 hours

NYE loader bucket with cutting edge 

 

1994 550 E CASE DOZER 

4900 hours 

Click to view Item Photo Gallery

Item Description:

2004 Link-Belt 4300 Excavator 

10,000 Hours Showing

Aux plumping 

NYE 48” bucket 

Good shape All Around. 

Serial number # LE2J04398

$52,900

Click to view Item Photo Gallery

Item Description:

Zetor Tractor SN 004737, 1,362.99 HRS


Please wait...